Typical applications and use
- Sound intensity measurements
- Sound source location
- Sound power measurements
- IEC 61043 standard measurements
- Sound source ranking
- Sound intensity mapping
The probe set includes solid interchangeable spacers for microphone separations from 12 mm to 50 mm so that the probe can cover the frequency range from 100 Hz to 10 kHz.
All components are made specifically for sound intensity applications. Each small 1/4" diameter by 40 mm long microphone preamplifier is housed in a robust stainless steel casing. The probe head is symmetrical which enables reliable calibrations as described in the proposed standard (ISO/DIS 9614-2) for sound power measurements using sound intensity measurements.
The G.R.A.S. 50GI-RP CCP Intensity Probe is a two-microphone sound intensity probe especially designed for use in conditions calling for a rugged design. It is equipped with CCP transducers and a remote control handle for direct connection to an intensity analyzer. The remote-controlled intensity probe comprises a 40GK-S1 sound Intensity Microphone Pair, two 26CC CCP Microphone Preamplifiers, three solid spacers of various lengths, windscreen and a probe handle.
The 50GI-RP is delivered in a carrying case as a ready-to-use kit, complete with all the above accessories.
The microphones are 1/2" free-field prepolarized microphones with a uniquely-designed pressure equalisation system, which ensures extremely well defined phase characteristics.
The microphones and preamplifiers are mounted on a swivel head on the telescopic arm of the handle. To cover the frequency range from 100 Hz to 10 kHz, the 50GI-P probe is delivered with three solid spacers for spacing the microphones at 12 mm, 25 mm, and 50 mm. These spacers can be easily interchanged without dismantling the probe.
Frequency ranges for different microphone spacersG.R.A.S. Sound & Vibration reserves the right to change specifications and accessories without notice.
|G.R.A.S. RA0213||Rugged Probe Head|
|G.R.A.S. 40GK-S1||1/2"' Intensity Microphone Set|
|G.R.A.S. RA0001||Right-angled (90º) Adapter for 1/2" microphone and 1/4" preamplifier|
|G.R.A.S. GR0040||Holder for spacer|
|G.R.A.S. RA0264||Spacer, 50 mm|
|G.R.A.S. RA0265||Spacer, 25 mm|
|G.R.A.S. RA0266||Spacer, 12 mm|
|G.R.A.S. 26CC Set||1/4" CCP Preamplifier set|
|G.R.A.S. AA0021||5 m Extension Cable, 5 m, 12 pin LEMO male - male|
|G.R.A.S. AC0024||Adapter cable, 12-pin LEMO to D-sub + 2xBNC|
|G.R.A.S. KE0122||Serial (D-sub) to USB adapter|
|G.R.A.S. AI0048||Probe handle|
|G.R.A.S. AA0010-S1||3 m LEMO 12-pin - Lemo 12-pin, Cable for Intensity Probe
|G.R.A.S. AA0010||10 m LEMO 12-pin - Lemo 12-pin, Cable for Intensity Probe
|G.R.A.S. 51AB||Intensity Calibrator|
|G.R.A.S. 42AP||Pistonphone with built-in barometerand thermometer (recommended)|
|G.R.A.S. RA0024||Two-port Calibration Coupler (for G.R.A.S. 42AP or 42AA Pistonphones)|