GRAS 12AB 2-Channel Power Module for GRAS Intensity Probes

Connection:
Traditional 200 V
Channel(s): 2

Technology

Typical applications and use

  • Sound-intensity measurements
  • GRAS Sound Intensity Probe Type 50AI versions B, C, and D

Design

The 12AB is built into a sturdy anodized aluminium cabinet and can be powered either by internal standard batteries or an external DC supply (12 V-18 V), e.g. a mains/line adapter.

The polarization voltage for the probe’s microphonescan be set to 200 V * — for use with Type 50AI, or 0 V — for prepolarized microphones. The voltage supply for the probe’s preamplifers can be set to 120 V * — for use with 50AI, or 28 V — for minimum power consumption.

The 12AB will run for up to 10 hours on fresh standard alkaline batteries. A Battery meter indicates the condition of the batteries.

The 12AB has a 9-pin D-sub socket wired up for connecting directly to the RS232 port of a computer; thus enabling software to make use of the remote control facilities of the GRAS 50AI Sound Intensity Probe. The input is a 12-pin LEMO socket on the front panel which is wired up for the GRAS 50AI Sound Intensity Probe versions B, C and D. This input is also connected to the 9 pin D-subconnector in order to:

a) Transmit the state (pressed/not pressed) of the two push buttons on the handle of the 50AI
When pressed: the blue button transmits DSR, the grey button transmits CTS

b) Signal the responses via the two LEDs also on the handle of the 50AI
When lit: the red LED is signalling RTS, the white LED is signalling DTR

By suitably programming the computer’s software, measurements and data acquisition can be controlled interactively via these push buttons and LEDs.

The two output signals of the probe are directly available via two standard BNC connectors (A andB) on the front panel.

The cabinet of the 12AB is 1/12 of a standard 19-inch rack; meaning that up to 12 of these Power Modules can be mounted in a standard 19-inch rack using the AK0040 Rack-mounting System.

Warranty

All GRAS products are made of high-quality materials that will ensure life-long stability and robustness. The 12AB is delivered with a 2-year warranty. The warranty does not cover products that are damaged due to negligent use.

Service and Repairs

All repairs are made at GRAS International Support Center located in Denmark. Our Support Center is equipped with the newest test equipment and staffed with dedicated and highly skilled engineers. Upon request, we make cost estimates based on fixed repair categories. If a product covered by warranty is sent for service, it is repaired free of charge, unless the damage is the result of negligent use or other violations of the warranty.

Specifications

CONDITIONING
.
Frequency response (±0.2 dB)
Hz
0.05 to 200 k
Output channel(s)
2
Output impedance
Ω
30
Direct coupling input to output
No
Phase matching, equal gain, no filters
IEC 61043
Linear mode
Yes
Type
Traditional power supply (LEMO)
Input channel(s), traditional power supply
2
Preamplifier supply
V
28 / 120
Polarization voltage
V
0 / 200
Overload indication
No
PC controlable
No
External filter option
No
Power amplifier overload detection
No
POWER SUPPLY
.
Power supply, battery
10 x LR6 (AA)
Power supply, external
Vdc
12 to 18
Power consumption
mA
180 to 210
Battery life, 28 V preamp. supply
h
11
Battery life, 120 V preamp. supply
h
9
Battery low indication
Yes
Fuse
mA
315 (slow)
Weight
g / oz
770 / 27.161
Specification Conditions

GRAS Sound & Vibration reserves the right to change specifications and accessories without notice.

Ordering info

Included

GRAS EL0001 10 x LR6 (AA) alkaline cells
GRAS AB0002 DC mains/line adapter, Europe
GRAS AB0003 DC mains/line adapter, USA

Optional

GRAS AK0040 19-inch Rack-mounting System

GRAS Sound & Vibration reserves the right to change specifications and accessories without notice.

Get Quote